A-1 Sewer & Septic Service Inc.
Emergency & same-day service!  Calls answered 24/7!
913-631-5201 Kansas 816-361-2121 Missouri





Kansas City Plumber Our  Team Online Specials Frequently Asked Questions Careers Schedule Service
Complete plumbing, drain cleaning and pumping services since 1968!

How Do I Clean a Faucet Aerator?

When your faucet becomes clogged, this might be due to a buildup of minerals and sediment. Fortunately, a quick clean-up is all it might take to solve this problem. You will need to take off the aerator, which caps the faucet, and then you will have to remove its inside screen(s). The screens are what you need to clean. Here are the items you want for the job:

  • A set of groove-joint pliers (these are adjustable to the size of the pipe fitting)
  • White vinegar or lime-dissolving solution (If you are using vinegar, make the solution with one part hot water to one part vinegar)
  • Masking tape
  • Paper clip
  • Old toothbrush or wire brush
  • Small bowl

First, you need to prepare for the process. You can put masking tape on the aerator or on the pliers to keep your faucet from getting scratched. You may want to cover up the sink drain, or else smaller parts of the aerator could fall through. Finally, you may also want to line the counter with a towel. Next, use the pliers to screw the aerator clockwise — and carefully. If you squeeze or twist with too much force, parts of the aerator can break. Once the aerator is off, you can take out the inside screens. Pushing them out might work; here is where the paper clip could come in handy. If you still cannot get the screens out, you can put the aerator in your solution for half an hour.

Once the screens are out, you may want to place every part of the aerator onto the towel, keeping them in the right order. When it comes time to put everything back together again, you will know which order to follow. Take your toothbrush and carefully clean out every part of the aerator. If you use too much force, the screens could warp and become useless. You would then have to buy new ones.

When you have cleaned everything up, you can reassemble the parts of the aerator, working in reverse order to how you took everything apart. Usually this means putting in the screen(s), disk, and then a washer or O-ring. The number and type of parts can vary according to the model of your faucet. To put the aerator back on, use your hand to turn it counterclockwise. Then you can use pliers to screw this on tighter.

If you are still experiencing problems with the water flow in your home plumbing system, you may want to contact a Kansas City plumber. Whether you are having trouble with clogged drains or are experiencing any other plumbing problems, you can find the help you need at A-1 Sewer & Septic Service Inc. We can provide you with a no-obligation quote. Call our office today to reach a dependable Kansas City plumber.

Our Blog

Read More
Contact Us
Plumbing Blog
Our Services
Commercial Jobs
Drain Cleaning
Emergency Plumbing
Faucets & Sinks
Garbage Disposal & Sump Pumps
Industrial Jobs
Leaking Toilets, Pipes & Fixtures
Pump Tanks
Residential Jobs
Septic Tanks & Grease Traps
Sewer Line Repair & Replacement
Water, Gas, & Sewer Lines
Water Heaters
Friend us on Facebook
View our Google+ profile
Follow us on Twitter
Visit us on YellowPages
Review us on Yelp
Visit us on SuperPages
Check us out on Yahoo!
Visit us on InsiderPages
View our BBB profile
View our profile on Manta

Johnson CO.


Jackson CO.


Wyandotte CO.


Platte / Clay CO.



A-1 Sewer & Septic Service Inc. - Kansas City Plumber
Located at 6370 Carter Street Shawnee, KS 66203. View Map
Phone: (913) 631-5201
Website: http://www.a-1sewerandsepticservice.com/